Low carbon steel shots contain less carbon, phosphorus and sulfur than high carbon steel shots. Therefore, the internal micro structure of low carbon shots are much smoother. It is softer compared to high carbon steel shots too. This results in 20 – 40 % longer abrasive life time.
Typical application areas: pre-treatment of steel or cast-iron surfaces before painting, descaling and rust removal, deburring.
· Ideal for use to provide clean, polished metal surface.
· It is used both turbine and compressed air blasting systems. Low carbon steel shots ensure lower turbine blades wear.
· Low carbon steel shots life cycle is about 30% longer than conventional high carbon steel shots.
· Shot blasting process produces less dust, that results in lower maintenance costs of filtration system.
Hardness: 380 – 440 HV
Specific density: ≥ 7.2 g/cm³
Bulk density: 4,35 – 4,55 kg/dm³
Storage conditions: dry and covered
Packing: 25 kg bags, 1 ton per pallet
Fe: > 98 %
C: 0,1- 0,2 %
Si: 0,10 – 0,25 %
Mn: 1,4 – 1,5 %
S: 0,035 %
P: < 0,035 %